One of the issues I'm running into is that the display alert buttons are invisible on Android. If using the Probe Matching function (Active Probe/Display Data) to pre-profile a Tristimulus probe to a Spectro, the same 'preset matrix' should always be used for the Tristimulus probe as was used when the Probe Matching data was generated.įor further information on the additional settings within the 'Options' menu see the Profiling Manual page.I recently converted out Xamarin Forms app to MAUI. The Matrix presets match the probe to different display technologies - specifically the backlight/illumination spectral response. Calibration Settings: using the drop-down menu any pre-set Matrix held with the i1 Display Pro can be selected.With RevB versions of the probe AIO (All In One) mode is the better option for most display types. With the first iteration of the i1 Display Pro only Frequency, Period, and BURST are available. Sync Mode: sets the sync mode for the probe, to best match the display refresh/sync operation.This provides the best possible low-light measurements, without impacting reading speeds at luma levels above the set value. Intelligent Integration: sets the nits level under which Intelligent Integration will be used.There is no default setting, as different values will be required depending on the display being profiled, with longer values generating more accurate and stable readings. Integration Time: sets the integration time for any given reading, in seconds.(This obviously ignores settings that are generic, such as Extra Delay Time, Probe Matching, Probe Offset, Luminance Units.) The i1 Display Pro has a range of variables that are directly associated with the probe - including Integration Time, Display Type, and probe Calibration Settings (Matrix pre-sets). Note: measurement performance data is based on X-Rite's manufacturing standards, equipment, and conditions, and is not guaranteed outside of X-Rite's own environment.Īs with all probes, the i1 Display Pro OEM operation and function is controlled via the 'Options' menu, accessed via the Calibration Interface, or Display Characterisation windows. Integrated counterweight, status LEDs, ambient diffuser cover and optics protection.Field upgradeable to support future display technologies.Pre-set calibration matrix settings - EDR (Emissive Display Reference) settings.Luma Measurement range: 0.1 to 2000 cd/m2įlicker mode - BURST (depreciated with introduction of AIO mode)Īll In One mode - AIO (combination of Frequency & Period modes).(The 2000 nits max luma capability was introduced Jan 2017) The Retail version is certified to 1000 nits. Note: The OEM version of i1 Display Pro is NOT the same as the 'Retail' version, as the OEM version has an extended dynamic range, with a certified Max Luma capability of 2000 nits. It utilises a 3 filter design with custom curve shaping for excellent CIE colour matching functions, as well as superior sensitivity, and has been specifically designed for modern display technologies, including direct displays and projectors. The i1 Display Pro OEM - RevB is factory calibrated using multiple display devices, making the it very accurate in a wide range of display applications.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |